Home > Nickel Alloy Grades

Nickel Alloy Grade Center

Alloys Grades

Explore our nickel alloy grades including Inconel, Hastelloy, Monel, and other high-performance alloys. Find detailed information about chemical composition, properties, standards and applications.

Grade Families
Inconel, Hastelloy, Incoloy, Monel, Nickel, Nimonic and other high-performance alloys.
Product Forms
Bar, plate, sheet, pipe, tube, strip, wire, forging, flange and custom size supply.
Technical Review
Compare alloy selection by corrosion resistance, temperature, strength, fabrication and availability.

Grade Archive

Choose nickel alloy grades by family

Compare each alloy family by its common grades, product forms, key properties and typical industrial applications.

Alloy 46

Alloy 46

Alloy 46 is a controlled-expansion nickel-iron alloy containing approximately 46% nickel and balance iron. Its low and relatively stable coefficient of thermal expansion makes....

Alloy 52

Alloy 52

Alloy 52 is a controlled-expansion nickel-iron alloy containing approximately 52% nickel and balance iron. Its thermal expansion is closely matched to a range of....

Cobalt STELLITE-21

Cobalt STELLITE-21

STELLITE® 21 is a low-carbon cobalt-chromium-molybdenum alloy with a tough cobalt matrix and a relatively low volume fraction of dispersed carbides. It provides excellent....

Cobalt STELLITE-6B

Cobalt STELLITE-6B

STELLITE® 6B is a wrought cobalt-chromium-tungsten alloy with excellent resistance to abrasion, erosion, cavitation, galling and seizing. Its hot hardness, dimensional stability and corrosion....

Cobalt MP35N

Cobalt MP35N

MP35N® is a high-strength cobalt-nickel-chromium-molybdenum alloy combining exceptional tensile strength, toughness, fatigue resistance and corrosion resistance. Its properties are developed through vacuum melting, solution....

Cobalt L605-HAYNES25

Cobalt L605-HAYNES25

Cobalt L-605, commonly identified as HAYNES® 25 alloy, is a cobalt-nickel-chromium-tungsten solid-solution-strengthened superalloy with excellent high-temperature strength, good oxidation resistance and very good sulfidation....

Cobalt COCRMO-F75

Cobalt COCRMO-F75

Cobalt CoCrMo-F75 is a cast cobalt-chromium-molybdenum alloy specified for surgical implant castings and implant-grade casting feedstock. Its high chromium content supports corrosion resistance and....

Rene 41

Rene 41

Rene 41 is a vacuum-melted, precipitation-hardenable nickel-chromium-cobalt-molybdenum superalloy that develops exceptional tensile, creep and stress-rupture strength through gamma-prime precipitation. It retains useful strength and....

HAYNES 282

HAYNES 282

HAYNES 282 is a nickel-chromium-cobalt-molybdenum alloy strengthened by gamma-prime precipitation. It combines high creep strength, thermal stability, oxidation resistance, fabricability and weldability for demanding....

HAYNES 242

HAYNES 242

HAYNES 242 is an age-hardenable nickel-molybdenum-chromium alloy combining high strength, relatively low thermal expansion, fatigue resistance, thermal stability and useful oxidation resistance. A long-range....

HAYNES 230

HAYNES 230

HAYNES 230 is a nickel-chromium-tungsten-molybdenum solid-solution-strengthened alloy offering an exceptional combination of high-temperature strength, oxidation resistance, thermal stability and fabricability. It is particularly effective....

HAYNES 214

HAYNES 214

HAYNES 214 is a nickel-chromium-aluminum-iron wrought alloy developed for exceptional oxidation resistance in high-temperature, relatively low-stress service. At approximately 955 °C and above, its....

HAYNES 188

HAYNES 188

HAYNES 188 is a cobalt-nickel-chromium-tungsten solid-solution-strengthened alloy combining excellent high-temperature strength, oxidation resistance, hot-corrosion resistance and room-temperature fabricability. It is particularly effective for long-term....

Kovar

Kovar

Kovar is a vacuum-melted iron-nickel-cobalt controlled-expansion alloy developed for hermetic sealing to hard borosilicate glass and selected ceramic materials. Its tightly controlled chemistry produces....

Invar 36

Invar 36

Invar 36 is an iron-nickel controlled-expansion alloy containing approximately 36% nickel. Its thermal expansion rate is approximately one-tenth that of carbon steel at temperatures....

Super Invar 32-5

Super Invar 32-5

Super Invar 32-5 is an iron-nickel-cobalt controlled-expansion alloy developed for exceptionally low dimensional change around room temperature. Identified as UNS K93500, it provides lower....

Invar 42

Invar 42

Invar 42, also known as Alloy 42 or NILO 42, is a controlled-expansion iron-nickel alloy developed to provide a predictable thermal expansion rate over....

Incoloy A-286

Incoloy A-286

Incoloy A-286, designated UNS S66286, is an age-hardenable austenitic iron-nickel-chromium superalloy developed for high strength, oxidation resistance and reliable mechanical performance from cryogenic temperatures....

Incoloy 825

Incoloy 825

Incoloy 825, designated UNS N08825, is a titanium-stabilized nickel-iron-chromium alloy containing molybdenum and copper for resistance to a wide range of corrosive environments. Its....

Incoloy 800

Incoloy 800

Incoloy 800, designated UNS N08800, is an austenitic nickel-iron-chromium alloy combining corrosion resistance, heat resistance, strength and metallurgical stability. Its nickel content helps resist....

Material Selection Support

Not sure which nickel alloy grade is suitable?

Send the medium, temperature, pressure, fabrication process, product form and required standard. We can help compare practical grade options for corrosion resistance, heat resistance, availability and budget.

Request Grade Support

Home Tel Mail Inquiry